Taking into consideration the operation needs of steel and foundry industries, cored wire is not only available in common size cored wires but also can be produced as per customer’s special requests.

Products

Fill Rate (g/m)

Chemical composition

Applications

Ø 9mm

Ø 13mm

Ø 16mm

CaSi

120

225

330

Ca:30%min   Si:55%min    Al:1.5%max
S:0.06%max  C:1.0%max   Fe:4%max
P:0.05%max

Suitable in desulphurization, deoxidation and modification of inclusions.

CaFe

140

260

360

Ca:30%min   

Fe:68%min   

Al:0.8%max

For low Si steel, modifications of inclusions, desulphurization, deoxidation and avoids nozzle clogging when casting.

C

55

140

210

C:98.5%min   Ash:0.45%max  V:0.4%max
S:0.5%max    H2O:0.3%max  P:0.2%max

Carbon fine adjustment, trimming addition.

CaAIFe

130

230

Ca:40%  Fe:30%  Al:30%

Similar capabilities of CaFe with a further grain size improvement.

FeTi

170

365

570

Ti:65%-75%min  Al:5%max  Si:1%max
C:0.4%max  P:0.05%max  S:0.05%max
V:3%max  Mo:2.5%max

For microalloying and deoxidation.

FeB

200

550

825

B:16%-18%min  

Al:0.5%max  C:0.5%max
Si:2%max  Fe:Balance

For microalloying.

MgFeSi

90

210

330

Mg:23%-26%min   Si:40%-45%min
Al:0.8%-1.5%      Ca:1.5%-3.0%  
TRe:1%-1.21%     Fe:Balance

Used in modularization.

Pure Al

203

316

395

Al:99.7%min  Si+Fe:0.3%max

For deoxidation and grain size improvement.

Pure S

95

180

S:99%min

Utilized in the resulphurising of engineering steels.

FeSi

150

350

Si:75%min  Fe:Balance

In nodularisation.

Pure Ca

58

155

-

Ca:98.5%min  Mg:0.5%max   Al:0.5%max

This PureCa in powder form for treatment low Si-Steel, modification of inclusions, avoid nozzle clogging when casting and improvement transverse mechanical properties of the steel.

Solid Ca

65

 -

 -

Ca:98.5%min  Mg:0.5%max   Al:0.5%max

PureCa solid rod form, similar application as PuraCa in powder. High recovery rate during secondary metallurgical treatment of molten steel.

Diameter

Coil Internal Diameter

Coil External Diameter

Coil Height & Width

9mm土0.5mm

600mm +/-10%

1150mm +/-5%

1100mm +/-10%

13mm土0.5mm

600mm +/-10%

1150mm +/-5%

1100mm +/-10%

15mm土0.5mm

600mm +/-10%

1150mm +/-5%

1100mm +/-10%

16mm土0.5mm

600mm +/-10%

1150mm +/-5%

1100mm +/-10%